基于线上线下结合的无机定性分析实验教学

针对在实验室开设定性分析实验受到的制约,设计并开设了"无机化合物的性质与鉴定"虚拟实验,以作为常规无机定性分析实验的重要补充和扩展。虚拟实验和传统实验一并开设,构成线上线下结合的教学模式,完善知识体系,全面培养学生的无机定性分析能力。     

Imine Oligomers and Polymers

Abstract

In the last few years, polymers with highly conjugated chains have attracted much attention because of their wide variety of applications in the field of electronics, opto‐electronics, and photonics. Polyimines (PIs) (polymeric Schiff bases) is a class of polymer family, which has been less reviewed. In this paper, we focus on the synthesis methods of PIs by polycondensation, using diamines or hydrazine and dialdehydes, diketones or quinone compounds, or by chemical and electrochemical polymerization of imine oligomers containing terminal oxidable groups (pyrrole, thiophene, furan, naphthalene, etc). PIs with liquid crystalline behavior or having rotaxane and dendrimer architectures are also discussed. Structure, thermal, opto‐electronic, electrical, and mechanical properties and some potential applications of this class of polymers are presented in the last chapters.     

Dynamics of surface dipole and tripole solitons in nonlocal nonlinear media with optical lattice field

We find the existence conditions for stationary dipole and tripole surface solitons formed at the interface of a nonlocal nonlinear medium and a lattice with linearly modulated frequency. We investigate how the degree of nonlocality, the depth, and the modulation frequency of the optical lattice field affect on the existence of the surface solitons and their dynamics. The relationship between the power and the model parameters is identified. The stability of the surface dipole and tripole solitons is numerically investigated.     

Anomalous Energy Minima Studies by Mindo/3

A previous publication¹ utilizing the INDO² and CND0/2³ semi-empirical SCF-MO techniques has shown that these methods predict anomalous minima in the potential surfaces of small molecules and molecular ions, particularly those of type 0-X-0. Two studies have bcmen published concerning the removal of such anomalous pre-dictiors. The first approach⁴ involved reparameterization of the INDO method – specifically involving the Slater exponents α, and the bonding parameters B° of carbon and oxygen – to remove the anomalous iinimum from the potential surface of C0₂. It was de-monstrated that reparameterization could be used to remove the Salse minimum in this case; but only at the expense of the other predictive qualities of INDO, or with the prediction of an unreal-istically broad energy minimum – neither of which could b e con-sidered an acceptable solution.     

Doping profiles from the capacity-voltage (C–V) characteristics of the [111] Si(p) single crystals doped by the In+ -ion-implantation

The ²³⁵U(n, f) cross-section has been measured after the installation of a liquid nitrogen cooled methane moderator at GELINA. The results are compared with previous data, and the influence of the cross section shape on the Westcott gf-factor is discussed.     

Miniaturized structures based on color centers in lithium fluoride: Optical properties and applications

Research activities concerned with color centers in alkali halide films started recently. The use of versatile, well-assessed, and low-cost fabrication techniques consisting of physical vapor deposition of Lithium Fluoride (LiF) films combined with direct writing lithographic processes allows the realization of miniaturized structures, like broad-band emitters, channel waveguides, optical microcavities and point-light sources emitting in the visible spectral range. Promising results have been obtained in the generation, amplification and waveguiding of visible light in LiF treated by low energy electron beams, where the efficient formation of stable primary and aggregate color centers also induces a local modification of the refractive index. A brief overview of the investigated optical properties is presented together with a short discussion about their perspectives of applications in optoelectronics.     

Simple model for blistering mechanism

A simple model for blistering mechanism is proposed for energies higher than 20 keV. The model assumes that through the nucleation of smaller bubbles, a critical bubble radius is reached. The planar stress results of Jeffery for a semi-infinite plate with a circular hole subject to a uniform inner normal pressure are roughly taken as valid for the three-dimensional case. Under this assumption, the thickness of the blister's cover and critical ion dose for blister formation are calculated from the knowledge of the mean projected range of ions and blister diameter taken from experimental results. The resulting values are in agreement with the experimental values reported. The model can qualitatively explain breakage at the top of the dome-shaped blisters observed in molybdenum at 1100 K.     

Experiments on 40 Gb/s Transmission with Wavelength Conversion: Results from the IST ATLAS Project

In this article we report the main experimental results obtained in the framework of the IST ATLAS project regarding the transmission at 40 Gb/s over long terrestrial links, including the frequency conversion of a signal. We report the single-channel 40 Gb/s transmission over a link 500 km long with an amplifier spacing of 100 km, both with G.652 fibers and G.653 fibers by periodically compensating the chromatic dispersion with dispersion-compensating fibers. We report the single-channel transmission at 40 Gb/s, also, after the wavelength conversion of a channel with both PPLN and semiconductor optical amplifier devices. In particular, 500 km distances are obtained with PPLN wavelength conversion and 300 km distances with semiconductor optical amplifiers. Some results have been reported for electronic devices operating at 40 Gb/s.     

Theoretical analysis of the radiation effect on the transient behavior of optoelectronic integrated devices

Theoretical analysis of the radiation effect on transient behavior of an optoelectronic integrated device composed of a heterojunction phototransistor and a light emitting diode is studied theoretically. First, the transient behavior and the rise time of this device before radiation are investigated based on the frequency response of the constituent devices and the optical feedback inside the device. Second, the effect of neutron irradiation flux on the transient behavior of this device is theoretically studied. The results show that, by increasing the optical feedback inside the device, the rise time in the amplification mode is increased along with an increasing output, while that in the switching mode can be reduced effectively, and the neutron irradiation reduces the transient response and the rise time in both the amplification and switching modes. This type of model can be exploited as optical amplifier, optical switching device, and other applications.     

Interatomic potentials in transition metals

The different roles played by the valence s and d electrons in determining the bulk properties of pure transition metals is described. In the light of this the expected behaviour of the inert gas-metal and metal-metal interatomic potentials is discussed.